Instruction PT400.indd

DMI Sports For Customer Service Call 1.800.399.4402

1.800.399.4402

FAX: 215.283.9573

Please have your model number when inquiring about parts.

Or write to:

DMI Sports

Customer Service

375 Commerce Drive

Fort Washington PA, 19034

Please visit our web site at:

www.dmisports.com

When contacting DMI Sports, please provide your model number

and item number (if applicable) if requesting a replacement part.

Item numbers can be found inside this owners manual.

Congratulations on the purchase of your new Prince

Table Tennis table. Our products are designed and

manufactured to give you years of game playing enjoyment.

KEEP BOX AND PACKING MATERIAL UNTIL TABLE

HAS BEEN COMPLETELY ASSEMBLED.

ALL DAMAGE MUST BE REPORTED TO DMI

WITHIN TEN DAYS OF RECEIPT.

If you have any problems with your new product,

PLEASE DO NOT RETURN IT TO THE STORE.

Please contact us:

Your Model Number _______________________

Your model number is also located on the original carton. These instructions

are also available online at: www.dmisports.com.

PT400

0100605

DMI Sports For Customer Service Call 1.800.399.4402

Please Keep Your Instructions! (You will need your Model number should you need to contact us.)

Before attempting assembly, please read through this instruction book to familiarize yourself with all

the parts and assembly steps. We recommend that two adults assemble this game. Please refer to the

Parts Identiﬁer on the following page and be sure that all parts have been included.

This product is manufactured according to the ITTF standards (International Table Tennis Federation),

and includes national and international patents. Be careful not to over tighten any screws, nuts or bolts.

DMI Sports Inc. warranties this product for one year from the purchase date for any manufacturing or

material defect. High-density chipboard is warranted for one year from date of purchase. Although we

at DMI Sports are dedicated to giving our customers the highest quality products, occasionally a part

may be missing. If you are missing a part, or if you have any questions, please call our customer service

department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach

us at: www.dmisports.com.

Do not return the game to the store. Please contact us ﬁrst at: 1.800.423.3220 or on our website at:

www.dmisports.com.

IMPORTANT!

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS TENNIS TABLE

-2-

DMI Sports For Customer Service Call 1.800.399.4402

TOOLS REQUIRED FOR ASSEMBLY:

• Phillips Head Screwdriver (or Electric Screwdriver) Not Included

• Wrench Set - Not Included

• Hammer - Not Included

PARTS IDENTIFIER

HARDWARE PARTS - Parts are NOT represented to scale)

H1 H2 H3 H4

H5 H6 H7 H8

5/16” Wing Nut

TTPH118

Large Lock Nut

TTPH120

1/4” Phillips Screw

TTPH107

1/4” Hex Nut

TTPH114

Qty. 4

Qty. 8

Qty. 8 Qty. 20 Qty. 4

Qty. 8 Qty. 4 Qty. 4 Qty. 4

5/16” Large Bolt

TTPH115

5/16” Small Bolt

TTPH116

5/16” Washer

TTPH119

5/16” Hex Nut

TTPH117

NOTE: The following parts are pre-assembled items and listed as replacement items only. Please

refer to the Parts Re-Order Form on the last page of this manual should you ﬁnd the need to

replace these and all other parts.

• RPPT400-TTPH112 (8) M6 x 16 screws are used to attach the Crossbar TTPM107 to the

Outer Legs TTPM106

• RPPT400-TTPH122 (8) #12 x 24 screws and RPPT400-TTPH113 (8) #12 Hex Nuts are used

to attach the Outer Legs TTPM105 to the TTPM11 L and TTPM111R Leg stays in addition

to the TTPM110 angle bracket.

#10 Tek Screw

TTPH099

Qty. 4

-3-

H10

3/8” Washer

TTPH130

Qty. 4

DMI Sports For Customer Service Call 1.800.399.4402

PARTS IDENTIFIER

ASSEMBLY PARTS

P1 P2 P3 P4

P5 P6 P7 P8

P9 P10 P11 P12

P14P13

Qty. 8

Plastic Wheel

TTPP101

Wheel Bracket

TTPP102

Table Frame

TTPM102

Cross beam

TTPM103

Short Brace

TTPM104

Plastic Ball Holder

TTPP104

Safety Catch Ring

TTPP107

Safety Catch

TTPP108

Net Holder

TTPP110

Carriage Tray

TTPP105

Plastic Leg Caps

TTPP113

Frame Plastic Cover

TTPP117

Guide Plastic Cover

TTPP118

Nylon Net

TTPP119

1/2 Assembled Acekit

RPACEKIT-HALF

Table Bracket, Metal

TTPM110

P16P15

Qty. 4 Qty. 2 Qty. 1

Qty. 4 Qty. 2 Qty. 4 Qty. 4

Qty. 2 Qty. 4Qty. 2 Qty. 4

Qty. 4 Qty. 1 Qty. 2 Qty. 12

P18P17 Qty. 4 Qty. 2

Safety Catch Support

TTPP111

Outer Leg

TTPM105

NOTE: P8, P23 and P16

through P21 come pre-

assembled to P15. They are

only listed here as replace-

ment parts should there be a

problem with them.

P19

Leg Cross Bar

TTPM108

P20

End Apron

TTPM124

Qty. 2 Qty. 2

P21

Qty. 4 P22 Qty. 4

Side Apron

TTPM125

Plastic Corner

TTPP122

-4-

Edge Support

TTPM129

P23 Qty. 2

DMI Sports For Customer Service Call 1.800.399.4402

STEP 3. IF NOT PRE-ASSEMBLED

(Fig. 3.1) attach the metal ring

(P7) to the end (hole) of each

safety catch (P8). Make sure the

safety catch works properly by pulling

the metal ring.

Attach Plastic Corners

using an (H9) screw, attach the

(P22) plastic corners to the

pre-assembled end

and side aprons.

Prince Match FSA - Code: PT400 - Assembly Instructions

(H1)

(H6)

(P2)

(P1)

(H4)

FIG. 2.1

FIG. 2.3

FIG. 2.2

FIG. 3.1

STEP 1. Separate all parts according to the assembly steps.

(P9)

(P3)

(P6)

(P3)

(H3)

(H5)

(P4)

(H2)

IMPORTANT!

Press (Wheel Assembly)

into carriage as indicated in

FIG. 2.2 and bolt to carriage

frame with lock nut (H6).

(P8)

(P7)

Note: FIG 3.1 comes fully assembled

to (P15).

STEP 2. (Fig. 2.1) Locate two (P3) carriage pieces (Tabel Frame) and attach (P2) into the base holes

provided using assembly hardware parts (H6) and (H10). Attach two (P1) wheels to (P2)

wheel bracket using (H1) and (H4). (If too tight, the wheels will not spin) Repeat this step for

the remaining wheels. There will be four double wheels when Step 2. is complete. Washer (H11)

can be found with Plastic Corners (P22) within seperate bag in packaging.

(P19)

(P15)

(P22)

(H9)

-5-

(P23)

(H10)

DO NOT OVER TIGHTEN BOLTS

AT PIVOT POINT (H6).

DMI Sports For Customer Service Call 1.800.399.4402

STEP 4. (Fig. 4.1) With two adults, lift table as shown. One side at a time, ﬁt the shoulder of the safety

catch into the track of the frame (P3). Lower the table as you depress the spring loaded plunger

on the safety catch. Following the track, the plunger will locate in the uppermost holes. While

continuing to support the table, depress the plungers again on both sides and lower the table

until the plungers snap into the lower holes. Maintain a hold of the table top until both braces

(P5) have been attached. Repeat this step for the other side.

(Fig. 4.2) Find the plastic tabs on the carriage tray (P10) and attach to carriage (P3).

(Fig. 4.3) With bolts (H2), wing nuts (H5) and washers (H3), attach the brace (P5) to the

carriage frame. Find screws (H7), washers (H3) and nuts (H8) and fasten each brace (P5) to

the table bracket (P16). Insert plastic cap (P12).

DO NOT OVER TIGHTEN THIS PIVOT POINT.

(Fig. 4.4) Closed position.

(Fig. 4.5) Insert the frame guide plastic cover (P13) in the carriage frame channels (P3).

AFFIX BOTH SIDES OF THE NET AT THE SAME TIME GRADUALLY.

Note: When inserting plastic caps or covers (P11, P12 and P13) gently hammer into place.

Care and Maintenance

Cleaning your table

Use a soft damp (not wet) cloth only. DO NOT USE ANY CHEMICALS, ABRASIVE OR CLEANING PRODUCTS on

the playing surface.

Maintenance of you table

All moving parts must be oiled including the pivot points. This will insure ease of use and safety of your table.

This table must be stored indoors to avoid damage to the surface. The dampness and temperature changes can

cause wood to warp, swell or blister.

Note: Illustrations for Step 4. are on the following page.

-6-

DMI Sports For Customer Service Call 1.800.399.4402

(P5)

(P16)

(H3)

(H2)

FIG. 4.3

(H8)

(H7)

Position the safety catch

device in the carriage

frame channels as seen in

FIG. 4.1.B

(P3)

(P14)

Prince Match FSA - Code: PT400 - Assembly Instructions

(P15)

(P13)

(P3)

STEP 4. Illustrations

FIG. 4.1

FIG. 4.4FIG. 4.5

(P10)

(H2)

(P12)

(H5)

(H3)

FIG. 4.2

(P3)

FIG. 4.1.B

(P11)

-7-

(H3)

DO NOT OVER TIGHTEN BOLTS

AT PIVOT POINT (H8) and (H5).

DMI Sports For Customer Service Call 1.800.399.4402

-8-

APPLYING LABELS

The very last step in completing the assembly of your new Prince Table Tennis table involves applying

the labels to the proper locations on the table. There are four types of labels to be applied.

#1 is the Style label. There are four style lables. Each of the four labels are applied to the four corners

of the tables side aprons as shown below.

#2 is the Crossbar label. There are two crossbar labels. Each crossbar label is applied to each of the

two crossbars on your table as shown below.

#3 is the Carriage Tray label. There are two tray labels. One of each of these labels will be applied to

each carraige tray on your table.

#4 is the Tabel Frame label. There are two table frame labels. Each of these labels will be applied to

the two table frames as shown below.

The labels represented here are not of actual size or color.

Note: It is recommended that you write the model number on the under-side of this table for future

reference.

DMI Sports For Customer Service Call 1.800.399.4402

RECOMMENDATION OF USE AND PRECAUTIONS

Anyone using or handling this table tennis table must always follow the illustrated instruc-

tions attached to the back of the board and be fully aware of the operating instructions.

1. Handling the table, (Assembly, open, close or to store) should always be done by two adults to prevent

accident or injury.

2. Be sure that no persons or objects are in the way of the boards when opening the table.

3. Do not put heavy objects on the table.

4. Do not sit on the table.

5. Do not clean the table with solvents or any other aggressive product because it could damage the

paint ﬁ nish.

6. Do not use sharp objects on the board or painted surface.

7. If the table is used for purposes other than playing table tennis, cover the surface to prevent any

damage.

8. Request proof of purchase and keep it during the warranty period.

9. Under no circumstances is the manufacturer responsible for direct or indirect damages

including loses of beneﬁ ts or any other commercial damage occurred by the use of the purchased

product.

10. The functioning and storage of this product should always be supervised by an adult.

11. Do not store or handle the table on an unstable ﬂ oor surface.

12. If safety device malfunction occurs, secure table tops until the problem is solved.

13. To extend the life of this product, (outdoor table or indoor table) protect it from moisture

or severe climate changes.

NOTE: Although we at DMI Sports are

dedicated to giving our customers the

highest quality products, occasionally

a table may be damaged in shipping.

If you ﬁ nd that it is necessary to return

your table to DMI Sports, please repack

the table as shown here.

-9-

DMI Sports For Customer Service Call 1.800.399.4402

P10

P11

P12

P13

P14

P15

P16

P17

P18

P19

P20

P21

P22

P23

TTPH115

TTPH116

TTPH119

TTPH117

TTPH118

TTPH120

TTPH107

TTPH114

TTPH099

TTPP101

TTPP102

TTPM102

TTPM103

TTPM104

TTPP104

TTPP107

TTPP108

TTPP110

TTPP105

TTPP113

TTPP117

TTPP118

TTPP119

RPACEKIT-HALF

TTPM110

TTPP111

TTPM105

TTPM108

TTPM124

TTPM125

TTPP122

TTPM129

TTPH112

TTPH122

TTPH113

TT400LABELS

5/16” Large Bolt

5/16” Small Bolt

5/16” Washer

5/16” Hex Nut

5/16” Wing Nut

Large Lock Nut

1/4” Phillips Screw

1/4” Hex Nut

#10 Tek Screw

Plastic Wheel

Wheel Bracket

Table Frame

Cross beam

Short Brace

Plastic Ball Holder

Safety Catch Ring

Safety Catch

Net Holder

Carriage Tray

Plastic Leg Caps

Frame Plastic Cover

Guide Plastic Cover

Nylon Net

1/2 Assembled Acekit

Table Bracket, Metal

Safety Catch Support

Outer Leg

Leg Cross Bar

End Apron

Side Apron

Plastic Corner

Edge Support

M6 x 16 Screw

#12 x 24 Screw

#12 Hex Nut

Match Label Sheets (1 of 2)

UNIT PRICE TOTAL AMOUNT

Subtotal:

(PA Residents Add 6% State Sales Tax:)

Shipping and Handling Charges:

TOTAL:

(ea.)

(ea)

(ea.)

PARTS RE-ORDER FORM PT400 Table Tennis Table

DATE:

NAME:

ADDRESS:

CITY:

PHONE:

STATE: ZIP CODE:

Send this form along with your

check or money order payable to:

DMI SPORTS

375 Commerce Drive

Fort Washington, PA 19034

www.dmisports.com

SHIPPING AND HANDLNG:

Up to $15.00 add $2.00 for S&H

Over $15.00 CALL

1.00

.50

2.50

20.00

10.00

4.50

1.00

5.00

7.50

1.00

9.50

175.00

8.00

3.00

15.00

12.00

3.00

12.00

1.00

4.50

REF.

PART# DESCRIPTION

QTY