MIXING SYSTEMS AND
DRILLING FLUID LOGISTICS
THE OPTIMAL
DRILLING FLUID
All information
about mixing systems
TRACTO.COMMA
RELIABLE MIXING TECHNOLOGY
IN FULL FLOW
The mixing systems from TRACTO
First-class drilling fluid technology is an important component of
successful drilling. Together with the bore rig and drilling tools, TT
drilling fluid technology forms an optimum unit for efficient work,
even in difficult soil conditions. High-performance mixing systems
and pumps guarantee a high flow rate and optimum quality of the
drilling fluid.
The drilling fluid in HDD technology
The drilling fluid made of water and Bentonite in HDD drilling tech-
nology has many indispensable functions. It is used, among other
things, to loosen the soil and support the free cut, to discharge the
cuttings, to seal the borehole and to reduce the wear of the drilling
and expanding tools. However, the most important function of the
HDD drilling fluid is to stabilise the drilling channel because gravity
permanently acts on the horizontal borehole. The mud must ensure
that the drill channel does not collapse and that the dislodged
cuttings are continuously discharged. And this works most reliably
with Bentonite, which consists of natural, particularly swellable clay
minerals.
Valuable mixture without alternative
The specific nature of the clay minerals makes Bentonite an indis-
pensable carrier for the drilling fluid in the HDD. Other drilling fluids
are not suitable for horizontal drilling due to the special conditions.
High-quality bentonites consist to 60 - 80% of a highly swellable
clay mineral called montmorillonite.
In the mixing system, the drilling mud required for loosening and
transporting the soil as well as for supporting the borehole is
mixed, by taking into account the soil properties found and pumped
internally through the drill rod to the drilling or expander head by a
powerful mud pump.
In order to achieve optimal soil penetration, it is essential to adapt
the parameters of the drilling fluid to the prevailing soil conditions.
Therefore, a sophisticated mixing technique is crucial in the HDD
process.
The drilling fluid is mixed in a mixing chamber. The mud additives
enter the mixing tank via a mixing funnel and a Venturi nozzle, where
they are circulated several times. After a short swelling time, the
drilling fluid is fed to the bore rig via powerful and robust pumps.
The mixing systems are driven via hydraulic power units, power
generators or the truck‘s auxiliary drive.
TRACTO offers suitable mixing systems for bore rigs up to the 30
tonne class. Depending on the size of the bore rig and the intended
use, the right machine can be selected from the wide product range.
The systems differ, for example, in the number and capacity of the
mixing tanks and the power of the pumps. Furthermore, various drive
concepts as well as numerous other options are available. Larger
mixing systems can be individually mounted on trucks or integrated.
Mixing systems
and drilling
fluid
logistics
at a glance
MIXING SYSTEM MA
MIXING SYSTEM MA
MIXING AND RECYCLING UNIT MRUHE
MIXING SYSTEM BMS EP
MIXING SYSTEM MAD
RINSING UNIT FU
TRUCK SETUP
VACUUM SUCTION BARREL
The compact water rinsing unit is particularly suitable for short bores
and installing smaller diameter pipes. For these applications, it is not
necessary to add Bentonite. Rinsing of the bore, as well as lubrica-
tion and cooling of drilling tools and the rods is done with water only.
Without the need for Bentonite, the GRUNDOPIT PS40 pit drilling rig
and the FU01 provide an economical solution for short crossings and
house connections.
RINSING UNIT FU
THE ECONOMIC
TECHNICAL DATA
FLUSHING UNIT FU
Length x Width x Height 1,240 x 835 x 1,000
mm
Weight (empty) approx. 120
kg
Tank volume of fresh water tank
300 l
Max. flow rate of high-pressure pump
14.6 l/min
Max. pressure of high-pressure pump
40 bar
Hydraulic oil quantity
13 l/min
Max. hydraulic oil pressure
85 bar
Sound power level Lwa < 80 dB(A
FEATURES
– Compact and lightweight tool for short bore paths
– No admixture of Bentonite required
– Water tank with 300 litre tank capacity
– Eyelets for easy transport on the construction site
– High-pressure pump with 14.6 l/min flow rate and 40 bar pressure
– Pump can also be used as a washing device by changing
the suction to fresh water
– Filling opening on top for the addition of polymers
– Operation in combination with hydraulic power units HP19
and HP28
GRUNDOPIT
PS40
FU01
VARIANTS
All data subject to change
The compact, powerful MA09 Bentonite mixing system is ideal for
smaller HDD drilling rigs such as the GRUNDOPIT PS40 and PS60
but can also be used for other bore rigs. The high circulation rate of
the mixing pump (500 l/min) enables extremely fast mixing of the
drilling fluid with only short drilling pauses. A small footprint of only
1.40 m and an empty weight of only 370 kg make transport easy.
MIXING SYSTEM MA
QUICK CONNECTION
VARIANTS
FEATURES
– Circulating pump for mixing with 500 l/min
– Mixing tank with capacity of 1,100 l and internal distribution system
– Venturi nozzle
– High-pressure pump with max. 40 l/min (depends on version)
– Large Bentonite funnel for easy filling
– Hot-dip galvanised base frame with forklift pockets and eyelets for
easy transport
– Optional 200 l fresh water tank, high-pressure pump can also be
used as a washing device by changing the suction to fresh water
– Operation in combination with hydraulic power units HP19, HP28
or HP 37
GRUNDOPIT
PS40
GRUNDOPIT
PS60
GRUNDOPIT
PS40
MA09-25
GRUNDOPIT
PS60
MA09-40
TECHNICAL DATA MIXING SYSTEM MA AND MA
Length x Width x Height (with fresh water tank)
1,450 x 1,400 x 2,050
mm
Length x Width x Height (without fresh water tank)
1,450 x 1,400 x 1,550
mm
Weight empty, without/with fresh water tank
370/390 kg
Weight full, without/with fresh water tank 1,500/1,700
kg
Mixing tank volume 1,100
l
Tank volume of fresh water tank
200 l
Max. flow rate of mixing pump
500 l/min
MA , IN COMBINATION WITH GRUNDOPIT PS AND HYDRAULIC POWER UNIT HP
Max. flow rate of high-pressure pump
25
l/min
Max. pressure of high-pressure pump
40 bar
Required hydraulic oil quantity 20
l/min
Required max. hydraulic fluid pressure
180 bar
MA , IN COMBINATION WITH GRUNDOPIT PS AND HYDRAULIC POWER UNIT HP
Max. flow rate of high-pressure pump
40
l/min
Max. pressure of high-pressure pump
40 bar
Required hydraulic oil quantity 30
l/min
Required max. hydraulic fluid pressure
180 bar
All data subject to change
MIXING SYSTEM MAD
HIGHPRESSURE FILLUP
The MA010D Bentonite mixing system is ideal for any drill rig with
its own high pressure Bentonite pump. The tank system is available
with one or two mixing tanks. Thanks to the 1300 l/min. mixing and
transfer pump, the drilling fluid is supplied almost instantly and is
pumped to the drill rig at up to 650 l/min.
FEATURES
– Self-priming, completely maintenance-free, 1300 l/min.
centrifugal pump
– 6% mixing ratio possible
– Mixing tanks with level indicator and integrated distribution system
for optimum circulation of the drilling fluid
– 3 bar maximum pressure (for long conveying distances)
– Fuel intake optionally directly from the truck diesel tank
– Stepless adjustment of engine speed and flow rate
– Particularly compact design
– Integrated workbench with vice and tool wall
– Large Bentonite funnel
– Optional transport frame for flexible use (see fig.)
– Filling filter (eddy current filter)
– Numerous options available for truck set-up
MISCHANLAGE
MA010D
Mixing system configurations
– 1 mixing tank, 4,000 l
– 1 mixing tank 4,000 l + 1 fresh water tank 4,000 l
– 2 mixing tanks, each 4,000 l
TECHNICAL DATA MIXING SYSTEM MAD
Length x Width x Height (mixing block without tank system)
1,060 x 800 x 1,800
mm
Mixing system weight
460 kg
Weight of mixing tank empty (1-tank system)
660 kg
Weight of mixing tank and auxiliary tank, empty (2-tank system)
1,260
kg
Weight of mixing system, 2 tanks filled
9,720
kg
Mixing tank volume
4,000
l
Tank volume of auxiliary tank
4,000
l
Max. flow rate of mixing and transfer pump
1,300
l/min
Max. pressure of mixing and transfer pump
3 bar
Engine manufacturer
Hatz
Engine model
1D90Z
Emissions standard Tier V
Max. engine power
10.7 kW
Max. engine speed
2,800
rpm
Number of cylinders
1
unit
Displacement
722 ccm
Diesel tank capacity
10 l
VARIANTS
All data subject to change
GRUNDODRILL
15XP / 15XPT
GRUNDODRILL
ACS300
GRUNDODRILL
28Nplus
GRUNDODRILL
18N / 18ACS
GRUNDODRILL
JCS130 / ACS130
MIXING SYSTEM MA
LONGTERM SUPPLY
The MA07 mixing system is a continuous Bentonite mixing and
supply system for all HDD drilling rigs with integrated Bentonite
high-pressure pump. The special tank and pump system ensures
continuous mixing and simultaneous delivery of drilling fluid. The
MA07 is available in 2 drive versions:
MA07D with integrated 28 kW Kubota diesel engine and
MA07E for operation with power generator.
FEATURES
– Continuous operation with simultaneous mixing and pumping of
drilling fluid in two 4,000 l mixing tanks possible
– 2 independent, self-priming centrifugal pumps, completely mainte-
nance-free, for simultaneous mixing of the drilling fluid
– Mixing tanks with level indicator and integrated distribution system
for optimum circulation of the drilling fluid
– Filling filter (eddy current filter)
– The Bentonite funnel with powerful Venturi nozzle processes more
than 25 kg of dry Bentonite per minute
– The 1,500 l/min. mixing and circulating pump supplies the drilling
TECHNICAL DATA
MIXING SYSTEM MA
Tank volume of mixing tanks 4,000
l
Number of mixing tanks 2 units
Max. flow rate of mixing pump 1,500
l/min
Max. pressure of mixing pump 3,5
bar
Max. flow rate of transfer pump 700
l/min
Max. pressure of transfer pump 3
bar
DRIVE OF MIXING SYSTEM MAD
Length x Width x Height (mixing block) MA07-D 2,300 x 1,120 x 1,800
mm
Weight of mixing system MA07-D 1,160
kg
Weight of mixing tank, empty 1,300
kg
Weight of mixing system + mixing tanks, full MA 07-D 10,460
kg
Engine manufacturer Kubota
Engine model D1803
Exhaust emissions standard
*
3A/Tier 4 or Tier V
Max. engine power
28
kW
Max. engine speed 1,840 rpm
Number of cylinders 3 units
Displacement 1,826
l
Diesel tank capacity 60
l
Sound pressure level LPa 79
dB(A)
Sound power level (LwA)
101.4 dB(A)
DRIVE OF MIXING SYSTEM MAE
Length x Width x Height (mixing block) MA07-E 2,200 x 1,120 x 1,800
mm
Weight of mixing system MA07-D/MA07-E 790
kg
Weight of mixing tank, empty 1,300
kg
Weight of mixing system + mixing tanks, full MA 07-E 10,090
kg
Power generator, at least (upon consultation)/recommended
*1
45/60
kVA
Engine power of mixing pump
18.5 kW
Engine power of transfer pump
5.5 kW
MIXING SYSTEM
MA07
VARIANTS
fluid suspension almost instantly
– The transfer pump delivers the drilling fluid suspension to the bore
rig at a rate of 650 l/min
– Fast, convenient cleaning
– Numerous options available for truck set-up
MIXING SYSTEM CONFIGURATIONS
– 2 mixing tanks, each 4,000 l
– 2 mixing tanks, each 4,000 l + 1 fresh water tank 800 l
*
Depending on model
*1
not included in scope of delivery | All data subject to change
GRUNDODRILL
15XP / 15XPT
GRUNDODRILL
ACS300
GRUNDODRILL
28Nplus
GRUNDODRILL
18N / 18ACS
GRUNDODRILL
JCS130 / ACS130
The BMS E2P is a permanent Bentonite mixing and storage system
for HDD rigs with an integrated high pressure Bentonite pump,
supplied exclusively in combination with a complete truck set-up.
In addition to the mixing and fresh water tanks, the fixed compo-
nents include a separate work area and an externally mounted
power generator. The truck is set up by BMS, maintenance and
service is provided throughout Germany by TRACTO.
Rear view of the fixed superstructure of the BMS E2P mixing plant
BMS EP MIXING SYSTEM
THE CONVENIENT SOLUTION
PERMANENT MIXING SYSTEM
- Continuous operation with simultaneous mixing and delivery of
the drilling fluid
-
4,000-litre mixing tanks with tank lighting, level indicators and in-
tegrated distribution system for optimum circulation of drilling fluid
- 2 freshwater tanks with a capacity of 225 litres each
- Bentonite feed hopper with high performance venturi nozzles
- Transfer pump delivering up to 650 litres per minute to the drill rig
- Externally mounted 36.9kW generator, low noise operation,
operated via interface in superstructure
- Work area with storage and separate side access, workbench with
bench vice, electrical cabinet and engine control unit
BMS E2P
MIXING SYSTEM
VARIANTS
TRAILER BODY
- High quality truck body
- Rear and side access ladders
ADDITIONAL COMPONENTS
- Tool holder, shelves and integrated drawers for drilling accessories
- Diesel pump for refuelling system
- Various sockets (Schuko and CEE)
- LED interior and exterior lighting
- Electric cable winch
- Webasto independent heater for frost protection
All data subject to change
TECHNICAL DATA BMSEP
Dimensions L x B x H (box) 7,366 x 2,464 x 2,460 mm
Weight of mixer with case approx. 6,500 kg
TANKS
Number of mixing tanks 2 St.
Mixing tank capacity 4,000 l
Number of freshwater tanks 2
Fresh water tank capacity 225 l
MIXING/TRANSFER PUMPS
Type Self-priming centrifugal pump
Motor power 7.5 kW
Max. operating pressure 3.5 bar
Max. transfer pump flow rate 1,500 l/min
Sound power level 83 dB(A)
GENERATOR
type Underfloor
Engine power 36.9 kW
Displacement 2.48 l
Max. speed 1,500 U/min
Noise level 84 dB(A)
GRUNDODRILL
15XP / 15XPT
GRUNDODRILL
ACS300
GRUNDODRILL
28Nplus
GRUNDODRILL
18N / 18ACS
GRUNDODRILL
JCS130 / ACS130
MRUHE MIXING AND RECYCLING UNIT
SYSTEMATIC RECYCLING
Mobile mixing and recycling unit
Only high-quality and perfectly matched mixing and recycling tech-
nology guarantees uninterrupted operation and optimum cleaning of
the used drilling fluid. The MRU250HE was developed and designed
according to these criteria. It combines a high-performance recycling
system with a fully-fledged mixing unit for continuous mixing, con-
veying and processing of the drilling fluid. This mobile system allows
drilling fluid to be recycled directly on site, reducing downtime.
Recycling
in detail.
More at
TRACTO.COM
RECYCLING
MIXING SYSTEM
- Mixing tanks with level indicator and integrated distribution
system for optimum circulation of the drilling fluid
- Large Bentonite funnel with powerful Venturi nozzle
and integrated dust extraction system
- 2 mixing tanks, each with a tank capacity of 4,000 litres
- Quick and easy cleaning
- Pallet storage area for Bentonite
RECYCLING SYSTEM
- 2 tilt-adjustable shakers for removing coarse solids
- Hydrocyclones for removing the fines
- Collection tank with level indicator for used
and pre-cleaned drilling fluid
- Solids chute on the back for screened coarse and fine material
MRUHE MIXING AND RECYCLING UNIT
SYSTEMATIC RECYCLING
VARIANTS
ADDITIONAL COMPONENTS
- Integrated workbench with tool panel
- 500 litre freshwater tank with level indicator
- Feed funnel for adding additives to optimise flushing
- Integrated drawers and storage options for drilling accessories
- Folding steps
- High-pressure cleaner
- Optional pit pump for suctioning the used rinsing fluid
from the start or target pit
- Interior and exterior lighting
- Parking heater for frost protection
- Monitoring of shaker loading via cameras (optional)
- Interface to the drilling rig
(with GRUNDODRILL ACS130 / JCS130 and ACS300)
- Pallet storage space for accessories (next to bentonite)
- Ergonomic operation thanks to pneumatically driven valve flaps
- Remote control via portable control panel
MRU250HE
MIXING AND
RECYCLING
UNIT
All data subject to change
GRUNDODRILL
15XP / 15XPT
GRUNDODRILL
ACS300
GRUNDODRILL
28Nplus
GRUNDODRILL
18N / 18ACS
GRUNDODRILL
JCS130 / ACS130
TECHNICAL DATA MRUHE MIXING AND RECYCLING UNIT
WEIGHT AND DIMENSIONS
Weight (Complete vehicle)
approx. 20 t
Dimensions (Complete vehicle)
approx. 12,000 x 2,550 x 3,950 mm
MIXING TECHNOLOGY
Tank capacity
2 x 4,000 litre
Version
PE Tank with filling level monitoring
Max. feed rate transfer pump
700 l/min
Max. pressure transfer pump
3 bar
RECYCLING SYSTEM
Shaker 2 x Double Decker-Shakers
Screen type
FSMB Panel Screen
Screen size
1,050 x 730 x 25 mm
Screen mesh width
60 - 300 API
Screen quantity (total) 8 pcs. (2 pcs. per level)
Inclination adjustment manual (hydraulic)
Cyclones
4'' and 5''
Max. cleaning capacity
250 l/min
Pit pump Hose pump
POWER UNIT
Engine Generator
Capacity
45 kVa
Emission standard
Stage V
Installation
Underfloor
STS V. STS V.
VACUUM SUCTION BARREL
A suction barrel is the optimal solution for keeping the excavation pit
free of drilling mud, sludge or other liquids.
The vacuum suction barrels of the STS VS series from Schmies
Metallbau are specially designed for demanding construction site
use.
Intelligent details make everyday work easier for the user. One of the
distinguishing features of the STS series is that the suction hoses do
not have to be dismantled for travel and are secured in a holder on
the side. Easy handling and fast, safe operation are ensured by the
360° free-rotating suction hose boom.
EQUIPMENT
- Continuously welded V-drawbar for maximum stability
- Sturdy mudguards with metal lamp housing
- Identical track width to passenger car and Sprinter ensures opti-
mum driving and helps prevent lurching
- Lowest possible centre of gravity of the suction barrel
- Suction unit tilted for better cleaning
- Flushing opening to remove impurities or blockages without open-
ing the container lid
- Stainless steel level indicator with colour scale
- 2 safety levels as standard to prevent damage to the compressor
- Syphon separator
- Overflow valve with 2 balls and sight glass
- Pressure gauge on oversuction set
- Protective bracket to protect pressure gauge and oversuction set
- Holders for quick attachment of the suction hoses by means of a
rubber strap
- Suction hose and suction lance do not have to be disconnected
from the suction connection after finishing work
- Enclosure of the drive unit made of aluminium to avoid dirt in the
engine unit (powder coating as standard in desired colour)
- Storage facility for tools and accessories between engine housing
and suction barrel
- Petrol industrial engine B&S Vanguard 13 hp equipped with oil sensor
and fuel tank as well as electric start
- Low-maintenance V-belt drive for engine-compressor unit:
Vacuum compressor MEC 3000 with 3,500 litres air performance
- All engine components and accessories housed in lockable engine
box
TECHNICAL DATA STS V-1.5 STS V-2.0 STS V-2.0
with suction arm
360° rotatble for easy
intake of liquids
STS V-2.0
with rear tipper
tiltable up to 60°
Length (mm)
4,850 4,850 4,850 4,850
Width (mm)
1,850 1,850 1,850 1,850
Height (mm)
1,850 2,050 2,330 2,150
Unladen weight (kg))
1,100 1,200 1,290 1,330
Tank capacity (l)
1,500 2,000 2,000 2,000
Low loader Tandem chassis (t)
2.8 3.5 3.5 3.5
APPLICATION
EXAMPLES
SUCTION OF VERY
SANDY DRILLING
MUDS (BENTONITE)
CLEANING AND
EMPTYING OF SEW
-
ERS, MANHOLES
AND PITS
SUCTION OF LIQUIDS
WITH SOLIDS
ABSORBING ALKALIS,
EMULSIONS AND
WASTE WATER
VARIANTS
All data subject to change
FULL SERVICE FOR
TRENCHLESS TECHNOLOGY
Whether its before, during or after the purchase, whether in person
or online – we are always at your side with advice and support.
Our wide-ranged service is specially tailored to the requirements of
trenchless pipe installations, so you can concentrate fully on your
core business.
Digital Solutions
Our website offers you the whole world of trenchless technology in
digital form. Find out more about our company, our products and
their applications. Discover the digital tools for the HDD drilling
technology and many other intelligent solutions. Always stay up to
date by using the links to our social media channels. Or you can
order machines, accessories and spare parts in our eSHOP – easy
and conveniently via PC, smartphone or tablet.
Nodig Product Specialists
You can truly rely on our product specialists for all technical ques-
tions regarding the function and application of our steerable and
non-steerable NODIG-systems. With comprehensive knowledge in
each of their special fi elds, you can be sure they will fi nd the best
solution for your trenchless projects and advise you competently
on setting up your jobsite.
Financing
We offer attractive fi nancing solutions for new and used machines
to our customers and sales partners through the TRACTO-TECHNIK
Finance GmbH. Be it fi nancing, hire purchase, various types of
leasing or insurance: we provide extensive expert advice, individ-
ually and personally, in order to fi nd the tailored solution for you.
Discretion goes without saying.
Training
Qualifi ed training enables you to apply trenchless technology even
more effectively and profi tably. Our wide range of training courses
for machine operators, construction professionals as well as plan-
ners and clients cover all aspects of NODIG technology, including
special topics. Certifi ed trainers also instruct you, in theory and
practice according to your individual requirements, either at one of
our numerous company locations, or directly on your own premises
or online, independent of time and place.
Specialised Civil Engineering Service
(Application Technology)
The specialised civil engineering service for application technology
provides support for all your trenchless construction sites.
Our experts demonstrate the steerable and non-steerable NODIG
technology live in practical use, show your drilling teams how to use
it or actively assist with special projects.
Geoservice
Precise knowledge of the soil is the key to successful trenchless
projects. Our Geoservice team provides you with this professional
knowledge. Our expertise puts you in a position to master every type
of soil. Based on geoscientifi c maps and existing construction fi les,
we supply information on the soil, which will help you with calcula-
tions or supplements.
Used Equipment
If you want to sell a used machine at an attractive price or are looking
for the right equipment for your tasks, our full service for used NODIG
machines will take the workload off your hands – from appraisal and
price determination to professional repair and certifi cation, through
to achieving the best price for you via our used machine website with
access to one of the world’s largest construction machinery platforms.
After Sales
Via our worldwide service network we are always there for you,
even after the purchase. A total of fi ve TRACTO plants and seven
customer centres in Germany, as well as our worldwide sister
companies and sales partners guarantee fast supply of spare parts
and immediate availability. Our competent service staff offer fast
assistance, to ensure you don’t lose any time.
Discover all
Services
TRACTO.COM
SERVICES
FULL SERVICE FOR
TRENCHLESS TECHNOLOGY
Whether its before, during or after the purchase, whether in person
or online – we are always at your side with advice and support.
Our wide-ranged service is specially tailored to the requirements of
trenchless pipe installations, so you can concentrate fully on your
core business.
Digital Solutions
Our website offers you the whole world of trenchless technology in
digital form. Find out more about our company, our products and
their applications. Discover the digital tools for the HDD drilling
technology and many other intelligent solutions. Always stay up to
date by using the links to our social media channels. Or you can
order machines, accessories and spare parts in our eSHOP – easy
and conveniently via PC, smartphone or tablet.
Nodig Product Specialists
You can truly rely on our product specialists for all technical ques-
tions regarding the function and application of our steerable and
non-steerable NODIG-systems. With comprehensive knowledge in
each of their special fi elds, you can be sure they will fi nd the best
solution for your trenchless projects and advise you competently
on setting up your jobsite.
Financing
We offer attractive fi nancing solutions for new and used machines
to our customers and sales partners through the TRACTO-TECHNIK
Finance GmbH. Be it fi nancing, hire purchase, various types of
leasing or insurance: we provide extensive expert advice, individ-
ually and personally, in order to fi nd the tailored solution for you.
Discretion goes without saying.
Training
Qualifi ed training enables you to apply trenchless technology even
more effectively and profi tably. Our wide range of training courses
for machine operators, construction professionals as well as plan-
ners and clients cover all aspects of NODIG technology, including
special topics. Certifi ed trainers also instruct you, in theory and
practice according to your individual requirements, either at one of
our numerous company locations, or directly on your own premises
or online, independent of time and place.
Specialised Civil Engineering Service
(Application Technology)
The specialised civil engineering service for application technology
provides support for all your trenchless construction sites.
Our experts demonstrate the steerable and non-steerable NODIG
technology live in practical use, show your drilling teams how to use
it or actively assist with special projects.
Geoservice
Precise knowledge of the soil is the key to successful trenchless
projects. Our Geoservice team provides you with this professional
knowledge. Our expertise puts you in a position to master every type
of soil. Based on geoscientifi c maps and existing construction fi les,
we supply information on the soil, which will help you with calcula-
tions or supplements.
Used Equipment
If you want to sell a used machine at an attractive price or are looking
for the right equipment for your tasks, our full service for used NODIG
machines will take the workload off your hands – from appraisal and
price determination to professional repair and certifi cation, through
to achieving the best price for you via our used machine website with
access to one of the world’s largest construction machinery platforms.
After Sales
Via our worldwide service network we are always there for you,
even after the purchase. A total of fi ve TRACTO plants and seven
customer centres in Germany, as well as our worldwide sister
companies and sales partners guarantee fast supply of spare parts
and immediate availability. Our competent service staff offer fast
assistance, to ensure you don’t lose any time.
Discover all
Services
TRACTO.COM
SERVICES
SWITZERLAND
TRACTO-TECHNIK SCHWEIZ AG
INDUSTRIESTRASSE 4
8360 ESCHLIKON TG, SCHWEIZ
T +41 79 8203897
CH@TRACTO.COM
TRACTO.COM/CH-FR
UNITED KINGDOM
TRACTO-TECHNIK UK LTD
10 WINDSOR ROAD
BEDFORD MK 42 9SU
T +44 1234 342566
F +44 1234 352184
INFO@TRACTO-TECHNIK.CO.UK
TRACTO.COM/UK
FRANCE
TRACTO-TECHNIK FRANCE S.A.R.L.
1/3 RUE DE LA PRAIRIE
F-77700 BAILLY ROMAINVILLIERS
T +33 1 60 42 49 40
F +33 1 60 42 49 43
FR@TRACTO.COM
TRACTO.COM/FR
USA
TT TECHNOLOGIES INC.
2020 EAST NEW YORK STREET
AURORA, IL. 60502
T +1 630 851 8200
F +1 630 851 8299
INFO@TTTECHNOLOGIES.COM
TTTECHNOLOGIES.COM
AUSTRALIA
TRACTO-TECHNIK AUSTRALIA PTY LTD.
10 ALICIAJAY CIRCUIT
LUSCOMBE, QLD 4207
T +61 7 3420 5455
AU@TRACTO.COM
TRACTO.COM/AU
MOROCCO
TRACTO-TECHNIK AFRIQUE S.A.R.L.
ROUTE DE TAMESNA 4022
POSTE 2044, 12220 TAMESNA
T +212 5 37 40 13 63 / 64
F +212 5 37 40 13 65
INFO@TRACTO-TECHNIK.MA
TRACTO.COM/MA
TRACTO HEADQUARTERS
TRACTO SISTER COMPANIES
TRACTO DISTRIBUTORS
PAULSCHMIDTSTRASSE
LENNESTADT, GERMANY
T
F
INFOTRACTO.COM
TRACTO.COMDE
TRACTOTECHNIK
GMBH & CO. KG
HEADQUARTERS
TRACTO PARTNER:
TRACTO.COM
ALGENV
Images, text and graphics subject to change. Some of the product or service designations listed below as well as depicted logos are registered trademarks of TRACTO and in these cases are subject to the respective applicable trademark law.
