After you finished Publish Coordinates, you can send the Architecture model to the consultants for coordination. Your consultants
should link the Architecture model to their model and Acquire Coordinates.
Do I need to perform any steps in the Revit Architecture model after I finished Publish
Coordinates?
No. When you publish coordinates, Revit writes the new coordinates into the Architecture model
file. You are good to go once you hit the publish coordinates button. However, make sure no
one is working on the building model before you start publishing coordinates.
With the shared coordinates defined in the site model, this will save you a lot of work if you need to link the site plan in the
architecture model. Simply open up the Revit architecture model and link the site plan in, but make sure you choose Auto - By
Shared Coordinates in the positioning pull down menu instead of “Auto - Center to Center” this time. The building model
will automatically orientate to True North instantly.
9LEARNING REVIT - VENG LEONG
CONSULTANT COORDINATION
TIPS